How to Reset Tire Pressure Light Dodge Journey
If you own a Dodge Journey and have ever noticed the tire pressure light illuminating on your dashboard, you might be wondering how to reset it. The tire pressure monitoring system (TPMS) is designed to alert you when your tires are underinflated, but it can also be reset after you have addressed the issue. Here’s a step-by-step guide on how to reset the tire pressure light on a Dodge Journey.
Step 1: Park Your Dodge Journey on a Flat Surface
Before you begin the reset process, make sure your Dodge Journey is parked on a flat and level surface. This is important because the TPMS relies on sensors in each tire to detect pressure changes, and an uneven surface can lead to inaccurate readings.
Step 2: Check Tire Pressure
Using a tire pressure gauge, check the pressure of each tire. The recommended tire pressure for your Dodge Journey can be found in the owner’s manual or on a sticker inside the driver’s door jamb. If any tire is underinflated, inflate it to the recommended pressure.
Step 3: Turn on Your Dodge Journey
Start your Dodge Journey and let it idle for a few minutes. This allows the engine to warm up and the TPMS sensors to communicate with the vehicle’s computer.
Step 4: Reset the Tire Pressure Light
There are two methods to reset the tire pressure light on a Dodge Journey:
1. Using the Key Fob:
– Press the “Lock” button on your key fob until the doors lock.
– Press the “Unlock” button on the key fob until the doors unlock.
– Repeat this process three times quickly.
– The tire pressure light should turn off, indicating that the system has been reset.
2. Using the Dashboard Controls:
– Turn the ignition to the “On” position without starting the engine.
– Press and hold the “Set” button on the dashboard until the tire pressure display shows “OK.”
– The tire pressure light should turn off, and the system will reset.
Step 5: Verify the Reset
After you have reset the tire pressure light, take a short drive to verify that the system is functioning correctly. If the light comes back on, it may indicate a sensor issue, and you should have it checked by a professional.
By following these steps, you should be able to reset the tire pressure light on your Dodge Journey without any trouble. Remember to regularly check your tire pressure and maintain it at the recommended level for optimal performance and safety.
